Noise / Vibration Control Materials
These products are used to control and minimize noise and vibration in industrial and commercial environments. The products work by absorbing airborne noise (usually done by foams) and damping structural noise or vibration (usually done by dense materials or foam/dense composites). Temperature ranges handled by these materials range from about –40F to 200F. We have several of these materials in stock and can custom make the barriers or pads you need from small quantities on manual presses to high volumes on fast CNC presses. The materials are available in many different thicknesses and widths. Please contact us with any questions you may have and allow us to help you create an effective solution. Sound Absorbing Foams – Sound absorbing foams come in a variety of thicknesses, styles, polymers, and can have different films or coverings applied to them. In general, foams absorb high frequency sound, are good thermal insulation, and can be adhesive backed for easier mounting. Available polymers include polyester, polyether, melamine, and mold and rot resistant polyimide.
Damping Sheet - A dense rubber or ‘loaded’ pvc used to reduce low frequency vibration. We can apply an adhesive back and custom cut this product into any configuration needed. Foam/Damping Sheet Composites – This is usually a combination of a cellular material and a solid material to handle the absorption and damping of a wide range of frequencies. We can apply an adhesive back and custom cut this product into any configuration needed. Materials Flyer |